XK (X150) V8-4.2L (2008)
Wiper Motor: Service and Repair
Windshield Wiper Motor - LHD (84.15.13)
Removal
1
Remove the cover and disconnect the battery ground cable.
2. Recover the A/C refrigerant.
3. Remove the plenum chamber panel.
4. Remove the engine compartment braces.
-
Release the grommet.
-
Remove the 4 Torx bolts.
-
Repeat the above procedure for the other side.
5. Disconnect the A/C pipes.
-
Remove the bolt.
-
Discard the O-ring seals.
CAUTION: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.
6. Remove the secondary bulkhead panel.
-
Remove the nut.
-
Release the 4 clips.
7. Release the power distribution box and position aside.
-
Remove the 2 Torx bolts.
8. Disconnect the engine harness electrical connector.
-
Loosen the bolt.