XKR Convertible (X100) V8-40L SC (AJ27) (2001) Front Door Latch Service and Repair
Front Door Latch: Service and Repair
Door Latch
Door Latch (76.37.12)
Removal
1. Turn ignition key to position II.
2. Motor door glass to fully raised position.
3. Turn ignition key to position O.
4. WARNING: Before commencing work within a door interior, the ground cable must be disconnected from the battery terminal to
prevent inadvertent activation of the global glass closing feature.
Remove battery cover and disconnect ground cable from battery terminal.
5. Remove door escutcheon.
1. Holding door handle in the open position, remove the escutcheon screw cover.
2. Remove the escutcheon screw, remove escutcheon from door casing and return door handle to closed position.
6. Remove trim mat from rear of door pocket and remove the screw.
7. Position door switch pack for access.
1. Using a suitable plastic hook, release plastic stud and remove trim from front of door pocket.
2. Remove switch pack to door casing screw and position switch pack for access.
8. Remove casing to door bracket screw.