XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-803004.png)
Caution:
Ensure the door trim panel is not damaged by removing the retainer clip bracket.
3.
Carefully pry the damaged retainer clip bracket from the door trim panel, using a suitable flat bladed tool (Illustration 2).
4.
Apply 3M Hotmelt 3748 Adhesive (or a suitable Polyolefin adhesive) to the marked area on the door trim panel.
5.
Install the new retainer clip bracket to the door trim panel (Illustration 3).
6.
Install the door trim panel (see Global Technical Reference GTR Workshop Manual, section: 501-05).
Global Technical Reference (GTR) Workshop Manual Information:
Internet access: http://www. Jaguartechinfo.com
Parts Information
Warranty Information:
