XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-814001.png)
Hood Insulator / Pad: Service and Repair
Hood Insulation (76.16.06)
Removal
1. Open hood and fit fender covers.
2. Slacken and remove expander screws from pad retainers.
3. Commencing at bottom, remove insulation pad plastic retainers and remove pad from hood.
Installation
1. Position insulation pad on hood and commencing at top, fit and fully seat plastic retainers.
2. Gently drive in and fully seat expander screws in retainers.
3. Remove fender covers and close hood.
