XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Trunk / Liftgate Lock: Service and Repair
Trunk Lid Lock Barrel
Removal
1. Remove trunk floor carpet.
2. Remove battery cover.
3. Remove trunk rear finisher.
4. Remove adhesive tape from trunk access aperture
5. Slacken and remove lock barrel housing securing nuts and release housing from operating cable abutment bracket.
6. Disconnect cable from lock barrel operating arm and remove barrel and housing from trunk.
7. Remove circlip securing operating arm to lock barrel and remove operating arm and bias spring from barrel.