XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
1. Position hose to bracket and tighten locking nut.
2. Connect brake tube to hose and tighten union nut.
-
Repeat procedure to connect opposite-side brake hose.
26. Fit cruciform strut (convertible vehicles only).
-
Position cruciform strut.
-
Fit and tighten bolts.
27. Fit generator cooling duct deflector.
-
Position deflector over rear vertical duct.
-
Slide deflector forward to engage center tang over undertray.
-
Fit bolt and tighten to 17-23 Nm.
28. Fit undertray.
1. Position undertray.
2. Fit three screws fasteners.
3. Fit eight new scrivets.
29. Fit front wheels.
30. Remove stands and lower vehicle.
31. Lower four-post lift.
32. Remove engine support tool.
1. Release hook adjustment nuts.
2. Release hooks from brackets.
3. Remove special tool.