XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Console: Service and Repair
Center Console
Removal
1. Position gear selector and passenger seat for access.
-
Turn ignition key to position II.
-
Apply footbrake and move gear selector to 'D'.
-
Release footbrake.
-
Power passenger seat to fully forward position and tilt squab forward.
-
Turn ignition key to O.
2. Remove battery cover and disconnect ground cable from battery terminal.
3. Remove 'J' gate surround.
4. Slacken and remove the four center console veneer panel securing screws and remove the mounting plates.
5. Position the veneer panel for access and disconnect the panel switch multiplugs.