XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-905005.png)
37. Withdraw headlining rear edge flange from retaining slot in rear bow rail and position rear tension cables for disconnection.
38. Release and remove tension cable retaining bushes, and disconnect cables from frame.
39. Release headlining fir tree or press stud fasteners from cantrails.
40. Release front of headlining from double-sided tape on frame.
41. Release the side tension cords and rear tension cables and remove headlining from vehicle.
42. NOTE: On certain early model year vehicles, press-stud fixings securing the the headlining to the frame must be removed and replaced by fir-tree
fixings. The procedure for this modification is detailed in Technical Bulletin.
Clean rivet swarf from convertible top area and remove double-sided tape from front of frame.
