XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-906006.png)
14. Fit front retaining rod to cover and seat rod in retaining clips.
15. Position latch plate and fit and tighten securing screws.
16. Fit guide pins and latch striker.
-
Position guide pins and fit and tighten securing screws.
-
Position latch striker and fit and tighten securing screws.
17. Fit cantrail seal carriers.
-
Position cantrail seal carriers and fit but do not securing screws.
-
Ensuring that seal carriers are positioned towards outboard end of elongated holes, tighten securing screws.
18. Fit and fully seat cantrail seals in carriers and fit and tighten securing screws..
19. Connect ground cable to battery terminal.
20. Turn hydraulic pump valve fully clockwise to power operation position.
