XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-907002.png)
11. Noting their positions, remove staples securing cover to backlight frame and release cover from frame.
12. NOTE: Do not allow top to latch.
Power top to 3/4 closed position.
13. Remove battery cover and disconnect ground cable from battery terminal.
14. Position trunk RH liner for access and turn hydraulic pump valve fully counter-clockwise to manual operation position.
15. Remove LH cantrail seal and carrier.
-
Slacken and remove screws securing LH cantrail seal to frame and withdraw seal.
-
Slacken and remove screws securing LH cantrail seal carrier and remove seal carrier from vehicle.
16. Slacken and remove screws securing RH cantrail seal to frame and remove seal.
17. Slacken and remove screws securing RH cantrail seal carrier and remove seal carrier.
