XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-907010.png)
17. Fit cantrail seal carriers.
-
Position cantrail seal carriers and fit but do not securing screws.
-
Ensuring that seal carriers are positioned towards outboard end of elongated holes, tighten securing screws.
18. Fit and fully seat cantrail seals in carriers and fit and tighten securing screws..
19
Connect ground cable to battery terminal.
20. Turn hydraulic pump valve fully clockwise to power operation position.
21. Ensuring that rear quarter lights are fully lowered, power top to fully up and latched position.
22. Apply adhesive to adjacent areas of cover and frame at main column and fully seat cover on frame.
23. Power top to half down position.