XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
24. Carefully withdraw hoses through BIW aperture into vehicle interior and remove hoses from vehicle.
Installation
1. Place hydraulic hoses in convertible top stowage compartment.
2. LH hydraulic cylinder only: Route pump connecting ends of hoses across top stowage compartment to RH side of vehicle.
3. Pass pump connecting ends of hoses through BIW RH aperture and into trunk.
4. LH cylinder only: Route hydraulic cylinder end of hoses around LH end of seat squab support panel and under rear harnesses and headlining to
cylinder location.
5. Remove blanking plugs from hydraulic cylinder and corresponding hose connectors, fit new 'O' ring seals to hose connectors.