XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
18. NOTE: When carrying out the following operation, do not disturb securing bolts installed in the open-ended slots.
Slacken and remove the latch assembly to BIW header rear securing screws.
19. Supporting latch assembly, slacken but do not remove securing bolts installed in the rear inner open-ended slots.
20. Withdraw latch assembly and sever and remove tie straps securing hydraulic hoses to assembly.
21. Remove spring clip from latch actuator clevis pin and withdraw pin.
22. Pull retaining lever away from latch hydraulic cylinder.