XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
Seat Back: Service and Repair
Front Seat Back Finisher 76.70.03
Removal
1
Using rear passenger access knob, release the seat back and move it to the fully forward position.
2. Remove rear access knob and escutcheon.
-
With a small flat bladed screwdriver, ease open the knob stem to clear the seat lever tang and remove the knob.
-
Carefully ease knob escutcheon from two studs.
-
Slacken and remove two screws.
3. Slacken and remove the two screws securing the lower section of the seat back finisher to the frame.