jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Fuel Tank|Installation|Page 1941 > < Fuel Tank|Installation|Page 1939
Page 1
background image

Fuel Tank: Service and Repair
Removal

Access to Luggage Compartment Components

There are no mechanical fixings or retainers to be dealt with to gain access to the battery, fuse/relay center and fuel tank. However, the compartment
floor should be removed to release the fuel tank liner.

WARNING:  BEFORE PROCEEDING, IT IS ESSENTIAL THAT ALL SAFETY PRECAUTIONS ARE READ AND UNDERSTOOD. See:
Service Precautions 

1. Release the fuel filler flap from inside vehicle.
2. Open the engine compartment and install paintwork protection covers.
3. Open the luggage compartment.
4. Remove the battery.  
5. Depressurise the fuel system. See: Fuel Filter/Fuel Pressure Release 
6. Remove the paintwork protection covers and close the engine compartment.
7. Drain the fuel tank using a suitably manually operated (NOT electrically operated) suction pump/tanker.
8. Remove the carpet from the luggage compartment floor.
9. Remove the front liner from the luggage compartment. 

10. Remove the side liner, left hand. 
11. Remove the side liner, right hand. 

12. Convertible/Soft Top vehicles only - remove the fuel tank closing panel.

Remove the seven bolts; three from the top edge and two from each lower bracket to body. 
Remove the closing panel.

13. Remove the fuel gauge tank sender unit.  
14. Drain the remaining fuel from the tank, through the sender aperture, using the equipment described previously.

Fuel Tank|Installation|Page 1941 > < Fuel Tank|Installation|Page 1939