XKR Convertible (X100) V8-4.0L SC (AJ27) (2001)
4. Fit cover to latch assembly.
-
Position cover over latch assembly, ensuring that internal boss locates correctly in latch housing.
-
Fit and tighten cover securing screw.
5. Fit latch assembly to door.
6. Connect ground cable to battery terminal and fit battery cover.
Door Glass Lift Switch Veneer Panel
Door Glass Lift Switch Veneer Panel 76.47.33
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove glass lift switch.
1. Remove glass lift switch end cover trim pad.
2. Remove the switch securing screw.
3. Disconnect the switch harness multiplug.