XKR Coupe (X100) V8-4.0L SC (AJ27) (2000)
![background image](/jaguar/xkr_coupe_(x100)/v8-4.0l_sc_(aj27)/Page-1185004.png)
7. Apply "Alphabond Rapid 101" epoxy adhesive to the shaded area of the bush (as shown), and corresponding area of the bush-housing bore.
CAUTION: Bush alignment error must not exceed 5 degrees.
8. Aligning bush with subframe.
-
Position bush with large single void facing forward.
-
Align small void centers with masking tape markers.
9. Install bush in housing.
-
Position a steel plate over the bush, ensuring the plate is large enough to cover the rubber flange.
-
Operate the press to install the bush.