Commander 2WD V6-3.7L VIN K (2006)
![background image](/jeep/commander_2wd/v6-3.7l_vin_k/Page-2272021.png)
2. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the D-pillar trim panel to the retaining clips in the D-pillar and
remove the trim panel.
3. Separate the seat release cable clip (2), remove the cable housing from the bracket (3) and disconnect the cable (1).
INSTALLATION
1. Connect the seat release cable (1), secure the cable housing into the bracket (3) and secure the clip (2).