Commander 2WD V6-3.7L VIN K (2006)
![background image](/jeep/commander_2wd/v6-3.7l_vin_k/Page-2272022.png)
2. Position the locating tabs on the bottom of the D-pillar trim panel into the slots in the top of the quarter trim panel.
3. Align the retaining tabs on the D-pillar trim panel with the retaining clips in the D-pillar and engage the retaining tabs that secure the trim panel to
the D-pillar.
4. Install the rear header molding.
Quarter Panel Trim
PANEL-QUARTER TRIM
REMOVAL