Commander 2WD V8-4.7L Flex Fuel (2009)
![background image](/jeep/commander_2wd/v8-4.7l_flex_fuel/Page-2563008.png)
4. Remove the nut (1) and bolt (7) from the frame rail and remove the upper suspension arm (2).
Left Side
LEFT SIDE
NOTE: All torques should be done with vehicle on the ground with full vehicle weight.
4. Remove the nut (1) and bolt (7) from the frame rail and remove the upper suspension arm (2).
Left Side
LEFT SIDE
NOTE: All torques should be done with vehicle on the ground with full vehicle weight.