Commander 2WD V8-5.7L (2008)
5. Carefully pull down the left rear edge of the headliner (1) from the upper liftgate opening far enough to reach between the headliner and the roof
panel to access the transmitter (2) and mounting bracket (4) on the headliner substrate.
6. Disconnect the take out of the overhead wire harness (1) from the connector receptacle on the side of the transmitter housing.
7. Release the two latch features (3) of the mounting bracket and disengage the transmitter from the locating pins of the bracket.
8. Remove the transmitter from between the headliner and the roof panel.