Commander 4WD V8-4.7L VIN N (2006)
Garage Door Opener Transmitter: Service and Repair
Electronic Overhead Module
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console assembly.
3. Remove the Electronic Overhead Module (EOM) retaining screws (1) and separate the EOM (2) from the overhead console.
INSTALLATION
1. Position the Electronic Overhead Module (EOM) (2) onto the overhead console assembly and install the retaining screws (1).
2. Install the overhead console assembly.
3. Connect the battery negative cable.
4. Program the universal transmitter codes.
