Commander 4WD V8-4.7L VIN N (2006)
5.
Snap the cable conduit into the retaining features in the rear bulk head (5 places) with the end of the tube retained in spring clip on the aluminum
guide. Ensure the clip is within the provided scribe lines on aluminum guide, (Fig 3).
6.
Torque the mounting bolts to 9 Nm (80 in. lbs.).
7.
Operate Sunroof module.
8.
Install headliner.
REPAIR PROCEDURE - XH/XK:
1.
Put the sunroof in the closed or vent position.
2.
Drop headliner right front corner, by removing the right side A-pillar trim, B-pillar trim sun visor, sun visor clip and rear view mirror.
3.
Look at and/or feel the drive cable conduit in the radius above the drain hose this is where the conduit will be kinked.
4.
Remove 2 sunroof mounting fasteners, (Fig 4).
