Commander 4WD V8-4.7L VIN N (2006)
6.
Push the conduit up and inboard to release it from the retention feature on the front beam, (Fig. 3) item 4.
7.
Push the conduit up to release it from the additional retention features, (Fig. 3) item 2.
8.
Pull the conduit out from over/off the drive cable.
9.
Slide the new conduit, p/n 68003816AA, back over the drive cable. See (Fig. 3) item 1, to ensure conduit is seated into notch to the rear of the
steel drive cable tube.
10.
Secure the conduit in the retention features shown in (Fig. 3).
11.
Install the conduit in the side clip.
12.
Operate the sunroof to ensure the ratcheting noise is eliminated.
13.
Install the mounting bolts.
14.
Install the headliner, A-pillar trim, sun visor and visor clip.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
