Commander 4WD V8-4.7L VIN N (2006)
2.
Remove M6 mounting bolts (4) at rear portion of sunroof module.
3.
Remove the kinked cable conduit(s) from sunroof module retaining features starting from the end at the metal clip and work back to motor area,
see (Fig 1).
4.
Assemble new cable conduit, p/n 68003812AA, in reverse order of Step # 3) by inserting the flared end over the exposed end of the drive cable.
Insure the flared end is sitting in the notch on the rear bulk head of sunroof module, (Fig 2).
