Commander 4WD V8-4.7L VIN N (2006)
8. Install the drain channel arms (2) into the mechanism (1) holes one at a time with the reinforcements on the inside of mechanism arms.
CAUTION: Do not pry the channel arms apart at the same time or you could break the drain channel.
9. Install the sunroof assembly into the vehicle.
10. Perform the sunroof position calibration. See: Testing and Inspection/Programming and Relearning/Sunroof Position Calibration
11. Perform the Excessive Force Limitation (EFL) calibration.
12. Install the glass as necessary.
13. Adjust sunroof glass to fit flush with roof line.
14. Verify proper operation of the power sunroof system.
