Commander 4WD V8-4.7L VIN N (2006)
10. Remove the mounting nuts at the HCU bracket (5).
11. Remove the HCU (3) with the bracket (5) from the vehicle.
12. Remove the 3 ABM. bolts securing the ABM. (1) to the HCU (2).
INSTALLATION
NOTE: If the ABM is being replaced with a new ABM is must be reprogrammed with the use of a scan tool.
1. Install the 3 ABM. (1) mounting bolts to the HCU (2) if removed tighten mounting bolts to 12 Nm (9 ft. lbs.).
