Commander 4WD V8-4.7L VIN N (2006)
2. Install the HCU (3) with bracket (5) to the vehicle and tighten the 2 mounting nuts.
3. Install the 4 chassis lines (3) at the HCU (4).
4. Install the secondary brake line at the HCU (4).
5. Install the secondary brake line at the master cylinder.
6. Install the primary brake line at the HCU (4).
7. Install the primary brake line at the master cylinder.
8. Reconnect the HCU (4) electrical connector (5).
10. Remove the brake pedal prop rod.
11. Bleed base and ABS brake systems.
