Commander 4WD V8-4.7L VIN N (2006)
Brake Caliper: Service and Repair
Front
Brake Caliper
DISC BRAKE CALIPERS
REMOVAL
FRONT
1. Raise and support vehicle.
2. Remove front wheel and tire assembly.
3. Drain small amount of fluid from master cylinder brake reservoir with clean suction gun.
4. Bottom caliper pistons into the caliper (5) by prying the caliper over.
5. Remove brake hose banjo bolt and gasket washers (6). Discard gasket washers.
6. Remove the caliper slide bolts (2).
7. Remove the caliper (1) from the adapter (4).
DISASSEMBLY