Commander 4WD V8-4.7L VIN N (2006)
13. Reconnect the brake fluid level electrical connector (9).
14. Install the HCU (1) with bracket (2) to the vehicle and tighten the 2 mounting nuts.
15. Reconnect the HCU electrical connector (5).
16. Install the 4 chassis lines (3) at the HCU (4).
17. Install the secondary brake line at the HCU (4).
18. Install the secondary brake line at the master cylinder.
19. Install the primary brake line at the HCU (4).
20. Install the primary brake line at the master cylinder.
21. Fill and bleed brake system.
