Commander 4WD V8-4.7L VIN N (2006)
1. Remove the instrument panel bezel from the instrument panel and place the bezel on a workbench.
2. Using a trim stick or another suitable wide flat-blade tool (1), release the three retaining clips (2) that secure each instrument panel air outlet (3) to
the instrument panel bezel (4) and remove the air outlets as necessary.
INSTALLATION
NOTE: Make sure that the air outlet is properly aligned to the instrument panel duct and that the foam seal on the outlet is not damaged.
1. Align the instrument panel air outlets (1) to the openings of the instrument panel ducts and install the air outlets into the instrument panel bezel (2)
as necessary. Make sure that each of the air outlet's three retaining clips (3) are fully engaged to the instrument panel bezel.
2. Install the instrument panel bezel onto the instrument panel.
Rear Air Outlets
OUTLETS-AIR
REMOVAL
