Commander 4WD V8-4.7L VIN N (2006)
10. Remove right rear quarter panel trim.
11. Disengage the retainer that secures the distribution duct (1) to the rear of the HVAC housing (2) and remove the duct
12. Disconnect the rear HVAC wire harness connector (3) from the body wire harness connector (4).
13. Remove the one nut and one bolt (2) that secure the rear HVAC housing (3) to the rear interior quarter panel (1).
14. Remove the rear HVAC housing from the vehicle and if required, remove the distribution duct (4) from the front of the HVAC housing.
INSTALLATION