Commander 4WD V8-4.7L VIN N (2006)
1. If removed, install the distribution duct (4) onto the front of the rear HVAC housing (3).
2. Position the rear HVAC housing into the vehicle.
3. Install the one nut and one bolt (2) that secure the rear HVAC housing to the rear interior quarter panel (1). Tighten the fasteners to 3 N.m (27 in.
lbs.).
4. Connect the rear HVAC wire harness connector (3) to the body wire harness connector (4).
5. Install the distribution duct (1) onto the rear of the HVAC housing (2) and engage the retainer to the housing.
6. Install the right rear quarter panel trim.
NOTE: Illustration shown with rear body cradle removed for clarity.
