Commander 4WD V8-4.7L VIN N (2006)
13. Carefully cut the foam seal (1) along the parting line (2) of the upper half of the HVAC housing (3) and the lower half of the HVAC housing (4). If
the seal is deformed or damaged, it must be replaced.
14. Remove the three metal retaining clips (5) that secure the two halves of the HVAC housing together.
15. Remove the ten screws (6) that secure the two halves of the HVAC housing together.
16. Disengage the two plastic retaining clips (7) and separate the two halves of the HVAC housing.
17. Open the rubber seal (1) and carefully lift the A/C evaporator (2) and insulator (3) out of the lower half of the HVAC housing (4).
18. If required, remove the rubber seal from the lower half of the HVAC housing. If the seal is deformed or damaged, it must be replaced.
19. If required, remove the insulator from the A/C evaporator. If the insulator is deformed or damaged, it must be replaced.
ASSEMBLY
