Commander 4WD V8-4.7L VIN N (2006)
1. Position the second row outboard right buckle (1) and anchor plate to the right center seat support bracket as a unit and loosely install the upper
screw (3) to secure the anchor plate to the bracket.
2. Position the second row center seat belt lower anchor (2) over the lower mounting hole in the buckle anchor plate.
3. Install and tighten the screw (3) that secures the seat belt lower anchor and the buckle anchor to the right center seat support bracket. Tighten the
screw to 50 N.m (37 ft. lbs.).
4. Tighten the upper screw that secures the buckle anchor to the right center seat support bracket. Tighten the screw to 50 N.m (37 ft. lbs.).
5. Position the right center seat support bracket outer trim (5) and the striker trim (4) to the seat and the striker as a unit.
6. Using hand pressure, snap the outer bracket trim onto the inner trim.
7. Install and tighten the two screws (1) that secure the striker trim to the striker bracket. Tighten the screws to 3 N.m (28 in. lbs.).
8. Restore the second row right outboard seat to its seating position.
