Commander 4WD V8-4.7L VIN N (2006)
22. Close and latch the covers on the PDC (1) and IPM (2).
23. Install and tighten the screw (1) that secures the battery negative cable eyelet terminal (2) to the inner fender (3). Tighten the screw to 28 N.m
(20.5 ft. lbs.).
24. Reconnect the battery positive cable terminal clamp (4) to the battery positive terminal post. Tighten the terminal clamp pinch-bolt hex nut to 5.5
N.m (50 in. lbs.).
25. Secure the battery positive cable terminal clamp cover (3) over the battery positive cable terminal clamp (4).
