Commander 4WD V8-4.7L VIN N (2006)
18. Remove the outer bolt (2 and 3) and disconnect the track bar (1).
19. Separate the exhaust hangers (1 and 2) and support the exhaust.
20. Using a grease pencil or equivalent, mark the location of the body cradle (3) on the underbody to aid installation.
21. Support the cradle (3) with a suitable lifting device.
22. Remove the upper cradle bolts (2).
23. Remove the side cradle bolt (1).
24. Remove the rail bolts (4) and remove the cradle (3).
INSTALLATION
