Commander 4WD V8-4.7L VIN N (2006)
1. Install the cradle and install the rail bolts (4).
2. Align the cradle to the marks made previously.
3. Tighten the bolts (4) to 108 N.m (80 ft.lbs).
4. Install the side cradle bolt (1).
5. Tighten the bolt (1) to 108 N.m (80 ft.lbs).
6. Install the upper cradle bolts (2).
7. Tighten the bolts (2) to 102 N.m (75 ft.lbs).
8. Connect the exhaust hangers (1 and 2).