Commander 4WD V8-4.7L VIN N (2006)
4. Install the coolant reservoir bolt.
5. Reconnect the cruise control servo wiring connector.
6. Install the air box cover and air intake hose.
7. Raise the vehicle up.
8. Install the lower stabilizer bolt (3) at the lower control arm.
9. Install the lower clevis bolt (2) at the lower control arm and tighten to 169 Nm (125 ft. lbs.).
10. Install the upper ball joint into the knuckle (1) and tighten the nut to 75 Nm (55 ft. lbs.).
11. Install the disc brake rotor.
12. Install the caliper adapter mounting bolts to 176 Nm (130 ft. lbs.).
13. Install the tire and wheel assembly
14. Lower the vehicle.
LEFT FRONT
1. Install the clevis bracket (4) to the shock (3) and tighten to 122 Nm (90 ft. lbs.).
2. Install the shock assembly (3) to the vehicle.
