Commander 4WD V8-4.7L VIN N (2006)
3. Install the four upper shock nuts (2), Tighten to 95 Nm (70 ft. lbs.).
4. Install the 3 PDC (1) bracket nuts.
5. Raise the vehicle up.
6. Install the lower stabilizer bolt (3) at the lower control arm and tighten to 115 Nm (85 ft. lbs.).
7. Install the lower clevis bolt (2) at the lower control arm and tighten to 169 Nm (125 ft. lbs.).
8. Install the upper ball joint into the knuckle (1) and tighten the nut to 75 Nm (55 ft. lbs.).
9. Install the disc brake rotor.
10. Install the caliper adapter mounting bolts to 176 Nm (130 ft. lbs.).
11. Install the tire and wheel assembly
12. Lower the vehicle.
