Commander 4WD V8-4.7L VIN N (2006)
4. Install the lower isolator (2).
5. Pull down on the axle and position the coil spring in the lower isolator.
6. Raise the axle with the hydraulic jack.
7. Install the shock absorber to the axle bracket and tighten to 115 Nm (85 ft. lbs.).
8. Install the stabilizer bar link to the body rail, Tighten to 102 Nm (75 ft. lbs.).
9. Install the wheel and tire assemblies.
10. Remove the supports and lower the vehicle.
