Commander 4WD V8-4.7L VIN N (2006)
5. Reconnect the front and rear washer hoses to the barbed outlet nipples of the washer pump.
6. Reconnect the headlamp and dash wire harness connectors (2) for the washer pump/motor unit (4) and the washer fluid level switch (3).
7. Reinstall the plastic push-in fasteners that secure the left front wheelhouse splash shield to the inner fender panel and the front fascia.
8. Lower the vehicle.
9. Install a new blind rivet (1) to secure the washer reservoir filler neck mounting bracket to the upper radiator crossmember.
10. Reinstall the washer reservoir filler cap hinge onto the hook on the filler neck.
11. Refill the washer reservoir with the washer fluid drained during removal.
12. Reconnect the battery negative cable.
