Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Engine, Cooling and Exhaust > Engine > Timing Components > Balance Shaft > Component Information > Service and Repair > Idler Shaft - Removal

Page 1
background image

Balance Shaft: Service and Repair
Idler Shaft - Removal

REMOVAL

1. Remove the primary and secondary timing chains and sprockets.

NOTE: To remove the idler shaft, it is necessary to tap threads into the shaft, to install the removal tool.

2. Using a 12 mm X 1.75 tap, cut threads in the idler shaft center bore.
3. Cover the radiator core with a suitable cover.

CAUTION: Use care when removing the idler shaft, Do not strike the radiator cooling fins with the slide hammer.

4. Using Slide Hammer 8517, remove the idler shaft.

Engine, Cooling and Exhaust > Engine > Timing Components > Balance Shaft > Component Information > Service and Repair > Idler Shaft - Removal

[PREV PAGE] [NEXT PAGE]