Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Sensors and Switches > Sensors and Switches - Body and Frame > Power Mirror Switch > Component Information > Description and Operation > Page 907

Page 1
background image

Power Mirror Switch: Testing and Inspection

POWER MIRROR SWITCH

1. Disconnect and isolate the battery negative cable. Remove the power mirror switch. Disconnect the wire harness connector from the switch.
2. Test the switch continuity. See the Switch Tests chart to determine if the continuity is correct for the suspect switch in each switch position. If not

OK, replace the inoperative switch as required.

Sensors and Switches > Sensors and Switches - Body and Frame > Power Mirror Switch > Component Information > Description and Operation > Page 907

[PREV PAGE] [NEXT PAGE]