Grand Cherokee 2WD V8-318 5.2L VIN Y MFI (1994)
![background image](/jeep/grand_cherokee_2wd/v8-318_5.2l_vin_y_mfi/Page-626006.png)
Belt Routing
CAUTION: When installing the serpentine accessory drive belt, belt must be routed correctly. If not, engine may overheat due to water pump
rotating in wrong direction. The correct belt with correct length must be used.
11. Position fan shroud and fan blade/viscous fan drive assembly to vehicle as a complete unit. Be sure the upper and lower portions of the fan shroud
are firmly connected. All air must flow through the radiator.
Fan Shroud Mounting Nuts
12. Install two fan shroud-to-radiator nuts. Be sure of at least 25 mm (1.0 inches) between tips of fan blades and fan shroud.
13. Install fan blade/viscous fan drive assembly to water pump shaft.
14. Fill cooling system.
15. Connect negative battery cable.
16. Start and warm the engine. Check for leaks.