Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Caliper Piston Installation
6. Press piston into caliper bore by hand, use a turn and push motion to work piston into seal.
7. Press caliper piston to bottom of bore.
Piston Dust Boot Installation
8. Seat dust boot in caliper with Installer Tool C-4842 and Tool Handle C-4171 or equivalents.
9. Replace caliper bleed screw if removed.
Rear
DISASSEMBLY
1. Remove caliper and brake shoes.
2. Remove mounting bolt boots and bushings from caliper.