Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Fig. 9 Caliper Piston Protective Cloth
3. Take a piece of wood and pad it with one-inch thickness of shop towels. Place this piece in the outboard shoe side of the caliper in front of the
piston. This will cushion and protect caliper piston during
4. Remove caliper piston with short bursts of low pressure compressed air. Direct air through fluid inlet port and ease piston out of bore.
CAUTION: Do not blow the piston out of the bore with sustained air pressure. This could result in a cracked piston. Use only enough air
pressure to ease the piston out.
WARNING: Never attempt to catch the piston as it leaves the bore. This may result in personal injury.
Caliper Piston Dust Boot