Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Remove Pinion Gear
6. Remove the pinion gear and collapsible spacer from housing. Catch the pinion with your hand to prevent it from falling and being damaged.
Front Bearing Cup Removal
7. Remove the front pinion bearing cup, bearing, oil slinger, if equipped, and pinion seal with Remover C-4345 and Handle C-4171.
Rear Bearing Cup Removal
8. Remove the rear pinion bearing cup from axle housing. Use Remover D-149 and Handle C-4171.
9. Remove the depth shims from rear pinion bearing cup bore in axle housing. Record the thickness of the depth shims.
NOTE: The pinion depth shims can be very thin. Verify that all shims have been removed before proceeding.
