Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Hose/Line HVAC: Service and Repair
Line-A/C Suction
REMOVAL
1. Recover the refrigerant from the refrigerant system.
2. Disconnect and isolate the negative battery cable.
3. Remove the air intake tube and the resonator.
4. Remove the nut (3) that secures the A/C suction line (2) to the A/C expansion valve (1).
5. Disconnect the A/C suction line from the A/C expansion valve and the retaining bracket (9) and remove and discard the O-ring seal.
6. Remove the nut (2) that secures the A/C suction line (3) to the A/C compressor (4).
7. Disconnect the A/C suction line from the A/C compressor and remove and discard the dual plane seal.
8. Install plugs in, or tape over the opened suction line fittings and the compressor and expansion valve ports.
9. Remove the A/C suction line from the engine compartment.
INSTALLATION