Grand Cherokee 4WD V6-3.0L DSL Turbo VIN M (2007)
Front Crankshaft Seal: Service and Repair
Installation
INSTALLATION
NOTE: To prevent potential oil leaks, DO NOT touch the front crankshaft inner seal. Always handle the seal from the outer diameter.
1. Clean timing chain cover (1) seal surface.
NOTE: Keep seal centered in the timing chain cover at all times.
2. Install crankshaft oil seal (2) using Installer 8936A.
3. Align the alignment key in the crankshaft with the key way in the damper and install the vibration damper. Torque bolt to 304 Nm, plus 90° (224
ft.lbs., plus 90°).
4. Position the drive belt back onto the pulleys and release the belt tensioner.